Physical Properties
(For a one eight inch clear casting at typical room temperature made with SPP Vinyl Ester Resin.)| Physical Properties
(For a one eight inch clear casting at typical room temperature made with SPP Vinyl Ester Resin.) | |
| Tensile Strength, psi | 10-11,000 |
| Tensile Modulus, X10 -5psi | 5.1 |
| Elongation % | 3.0 |
| Flexural Strength, psi | 18-20,000 |
| Flexural Modulus, X10 -5 | 5.5 |
| Heat Distortion Temp, F | 295-305 |
| Barcol Hardness | 40 |
|
The following list of chemical reagents and environments gives the highest known temperature at which equipment or surfaces coated with SPP Vinyl Ester Resin has given good service, or on which field or laboratory tests in accordance with ASTM C 581-87 has indicated good expected service life. | |
| Chemical Environment | Degrees F/Degrees C |
| HCL 10% | 230/110 |
| HCL 37% | 180/82 |
| Acetic Acid 10% | 210/99 |
| Acetic Acid 75% | 150/65 |
| Citric Acid, All | 210/99 |
| Lactic Acid, All | 210/99 |
| Sodium Hydroxide, 5% | 150/65 |
| Sodium Hydroxide, 50% | 210/99 |
| Sulfuric Acid, 25% | 210/99 |
| Sulfuric Acid, 70% | 180/82 |